California-faucets Pressure Balance PB-R Extension Uživatelský manuál stáhnout pdf

EXT-PB-R_ii_110128.doc Pg 1

EXT-PB05, EXT-PB10 & EXT-PB15

½”, 1” or 1-½” Extension Kit for Pressure Balance Valve PB-R

Installation Instructions

If pressure balance trim does not attach to the installed valve because the valve is positioned too far into the finished wall, these extension

kits will extend the valve’s cartridge nut an additional ½”, 1” or 1-½” to allow installation of originally supplied trim.

Each kit contains the following:

REMOVE BUSHING FROM CARTRIDGE NUT

• Remove BUSHING (2) from installed valve’s

CARTRIDGE NUT (1) as shown

INSTALL EXTENSION KIT EXT-PB05

• Attach EXTENSION SLEEVE (3) onto CARTRIDGE

NUT (1)

• Attach BUSHING (2) onto EXTENSION SLEEVE

(3)

• See .3. INSTALL TRIM

CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL

EXT-PB05 EXT-PB10 EXT-PB15

1 2

EXT-PB-R_ii_110128.doc Pg 1 EXT-PB05, EXT-PB10 & EXT-PB15 ½”, 1” or 1-½” Extension Kit for Pressure Balance Valve PB-R Installation Instru

EXT-PB-R_ii_110128.doc Pg 2 2b 3 2c 1/32” INSTALL EXTENSION KIT EXT-PB10 • Attach two (2) EXTENSION SLEEVE (3) onto CARTRIDGE NUT (1) • A

Žádné komentáře

California-faucets Pressure Balance PB-R Extension Uživatelský manuál